Chainrings

Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond cyclocross to commuting, gravel riding, and even full on-road applications with the giant 52t rings. - Fits 130 BCD 5 arm cranksets - Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings are for use with 130 BCD 5-arm cranksets. - Do NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800 - Not compatible with Campy CX10/11. - SRAM Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features a fifth bolt with 1x specific shoulder. This kit can be found online. - 38T important note: The chain may contact the spider arm slightly when using the 38T chainring (see last photo in the product images). We recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for 39T smallest ring. - Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting. Tech Specs: - Weight: 38t/52g | 40t/60g | 42t/62g | 44t/79g | 52t/132g - Material: 7075-T6 aluminum - Made in the USA - This 1x chainring and can be mounted in either the inner or outer ring position of a double crankset but can not be used in a 2x setup. - Chainline - The most common mounting is in the outer ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring) Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.

Looking for a 1X chainring for your Shimano compact triple crankset - models M782, M672, M622, or M612 – with the proven chain retention of our Drop-Stop® chainrings? Wolf Tooth has what you need in this beautifully machined chainring with threaded standoffs that proved and ideal chainline. - Fits any 96 BCDShimano Symmetric 4-bolt crankset - Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings fit any 96 BCD Shimano Symmetric bolt pattern crankset, and here are instructions on how to measure your BCD. - Compatible with the following Shimano crankset models: M782, M672, M622, M612 - Not compatible with XTR M9000 or XT M8000 - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - Chainline - 49mm. Provides a great chainline on most boost bikes. Use Drop-Stop A or B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 30/41g | 32t/50g | 34t/59g - Material: 7075-T6 aluminum - Made in the USA

The direct mount chainrings for SRAM cranksets with the 3-bolt mounting interface. They replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet. They are available in the Drop-Stop B tooth profile, which is optimized for SRAM Flattop chain. It is also compatible with all other 9-, 10-, 11-, and 12-speed chains except the Shimano 12-speed chain. Compatibility: - These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that these chainrings are NOT compatible with SRAM 8-bolt direct mount cranksets. - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability - There is one offset: Standard Road/CX/Gravel: 6mm offset for cyclocross and road crank applications with 47mm chainline - Praxis Works Road/CX cranks use the 6mm offset. - If using a 9-speed drivetrain, use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP B - Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC - Not compatible with 12spd Shimano HG+ chains Recommendations - - Recommend the use of a clutch style rear derailleur for the best chain security. - An L-wrench works best since the crank spindle may contact a socket adapter and prevent it from engaging properly. - Use the same 3 bolts to attach the Wolf Tooth ring or we carry replacement bolts Tech Specs: - Weights: 38T/90g | 40T/106g | 42T/111g - Material: 7075-T6 aluminum - Made in the USA

These chainrings are for Shimano direct mount cranks. The Wolf Tooth chainrings feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Compatibility: - Shimano XTR M9100, XT M8100, SLX M7100, and Deore M6100 series 12 speed cranksets. - Our chainring offset matches the offset of Shimano chainrings to replicate the intended chainline for the crankset. - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 32t/66g | 34t/72g | 38t/81g - Material: 7075-T6 aluminum - Made in the USA